Configurator Hose Assemblies

HomeBack to Start
Select: hose coupling side 1 (Threaded Couplings)
BSPPBritish Standard Pipe Parallel (ISO 228)

BSPTBritish Standard Pipe Thread - Taper (ISO 7)

NPSAmerican National Standard Straight thread pipe thread

NPTAmerican National Standard Taper thread pipe thread
AluminiumAl = Aluminium

Stainless SteelSS = 316 Stainless Steel 1.4401 (other grades available on request)

Brass AlloyBr = Brass Alloy

Carbon SteelCS = Carbon Steel (mild steel)

UHMWPE ('UPE')Ultra high molecular weight polyethylene
Combinationno hex / no lug

HexagonTightened using a spanner

LugTightened using a lug hammer
Stainless SteelSS = 316 Stainless Steel

Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
SELECTION
D9SG
THREAD
100MM
THREAD
chosen option
selectable
non selectable
Matrix
5Hose Coupling 2
6Part No.

Part Number

D9SG 100 L1=m...

Hose TypeDanoil 9SG - Polyamide lined composite hose with stainless steel inner wire and galvanised mild steel outer wire.
Product NameDanoil 9SG
Part NumberD9SG
Short DescriptionPolyamide lined composite hose with stainless steel inner wire and galvanised mild steel outer wire.
DescriptionMulti-layer thermoplastic hoses (composite hoses), for suction and pressure operation.
ApplicationRail car loading and unloading, road tanker bottom loading & in plant hose exchanges.
Application Heavy DutyShip to shore and on board marine transfer.
MediaBiodiesel, high aromatic solvents and MTBE.
CommentA tough, high strength composite transfer hose.
Inner helixStainless Steel AISI 316
LiningPolyamide
Fabric ReinforcementPolypropylene, Polyamide
Sealing FilmPolypropylene, Polyester
CoverBlue PVC coated Polyester fabric.
Outer helixGalvanised Mild Steel
StandardEN13765 Type 3
Max WP bar14 Bar (DN 250 = 10,5 Bar)
Safety factorStandard: 4:1
Heavy Duty: 5:1
Temperature min.-30 ° C
Temperature max.100 ° C
MarkingMarking on coupling ferrule: DD.MM.YY · Serial Number · xx MM / xx bar · BSEN13765
SizeDN 25 to DN 250
Size (ID)100 mm (4")
Product Name100 mm (4")
Part Number100
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Please Note:
For the correct choice of coupling and sealing materials please refer to our
chemical resistance chart or contact our sales team.
Last Update: 07.01.2021