Configurator Hose Assemblies

HomeBack to Start
Select: hose coupling side 1 (Flange)
Swiveling FlangeForm S swivelling flange

Fixed FlangeForm F fixed flange

Fixed Flange Weld NeckForm F weld neck fixed flange suitable for use in hostile environments of extreme pressure or low temperatures; mainly used for low temperature liquid gas transfer.
ASA 150ANSI B 16.5 150 PSI

ASA 300ANSI B 16.5 300 PSI

DIN PN 10 / 16Flanges conform to both DIN PN10 and DIN PN16

DIN PN 25 / 40Flanges conform to both DIN PN25 and DIN PN40

BS 10 Table DBS10 Table D 100PSI

BS 10 Table EBS10 Table E 200psi

TTMATruck Trailer Manufacturers Association

JIS 10 KJIS 10K 10 Bar

JIS 20 KJIS 20K 20 Bar
Stainless Steel (SS)316 stainless steel 1.4401 (other grades available on request)

Carbon Steel (CS)CS = Carbon Steel (mild steel)

Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.

Aluminium (Al)Aluminium (Al)

UHMWPE ('UPE')Ultra high molecular weight polyethylene
Carbon Steel (CS)CS = Carbon Steel (mild steel)

Plated Carbon Steel (PCS)Plated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
Carbon Steel (CS)CS = Carbon Steel (mild steel)
Stainless SteelSS = 316 Stainless Steel

Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
SELECTION
D9SG
FLANGES
100MM
FLANGE
chosen option
selectable
non selectable
Matrix
5Hose Coupling 2
6Part No.

Part Number

D9SG 100 L1=m...

Hose TypeDanoil 9SG - Polyamide lined composite hose with stainless steel inner wire and galvanised mild steel outer wire.
Product NameDanoil 9SG
Part NumberD9SG
Short DescriptionPolyamide lined composite hose with stainless steel inner wire and galvanised mild steel outer wire.
DescriptionMulti-layer thermoplastic hoses (composite hoses), for suction and pressure operation.
ApplicationRail car loading and unloading, road tanker bottom loading & in plant hose exchanges.
Application Heavy DutyShip to shore and on board marine transfer.
MediaBiodiesel, high aromatic solvents and MTBE.
CommentA tough, high strength composite transfer hose.
Inner helixStainless Steel AISI 316
LiningPolyamide
Fabric ReinforcementPolypropylene, Polyamide
Sealing FilmPolypropylene, Polyester
CoverBlue PVC coated Polyester fabric.
Outer helixGalvanised Mild Steel
StandardEN13765 Type 3
Max WP bar14 Bar (DN 250 = 10,5 Bar)
Safety factorStandard: 4:1
Heavy Duty: 5:1
Temperature min.-30 ° C
Temperature max.100 ° C
MarkingMarking on coupling ferrule: DD.MM.YY · Serial Number · xx MM / xx bar · BSEN13765
SizeDN 25 to DN 250
Size (ID)100 mm (4")
Product Name100 mm (4")
Part Number100
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingFlange
Please Note:
For the correct choice of coupling and sealing materials please refer to our
chemical resistance chart or contact our sales team.
Last Update: 07.01.2021