Configurator Hose Assemblies

HomeBack to Start
Select: hose coupling side 1 (Threaded Couplings)
BSPPBritish Standard Pipe Parallel (ISO 228)

BSPTBritish Standard Pipe Thread - Taper (ISO 7)

NPSAmerican National Standard Straight thread pipe thread

NPTAmerican National Standard Taper thread pipe thread
AluminiumAl = Aluminium

Stainless SteelSS = 316 Stainless Steel 1.4401 (other grades available on request)

Brass AlloyBr = Brass Alloy

UHMWPE ('UPE')Ultra high molecular weight polyethylene
Combinationno hex / no lug

HexagonTightened using a spanner

LugTightened using a lug hammer
Stainless SteelSS = 316 Stainless Steel

Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
FIRESAFE
D7GGFIRE
THREAD
38MM
THREAD
chosen option
selectable
non selectable
Matrix
5Hose Coupling 2
6Part No.

Part Number

D7GGFIRE 38 L1=m...

Hose TypeDanoil 7GG Fire~Safe VRS - Polypropylene lined fire~safe VRS composite hose with galvanised mild steel inner and outer wire.
Product NameDanoil 7GG Fire~Safe VRS
Part NumberD7GGFIRE
Short DescriptionPolypropylene lined fire~safe VRS composite hose with galvanised mild steel inner and outer wire.
DescriptionMulti-layer thermoplastic hoses (composite hoses), for suction and pressure operation.
ApplicationRail car loading and unloading, road tanker bottom loading & in plant hose exchanges.
Application Heavy DutyShip to shore and on board marine transfer.
MediaHeavy hydrocarbon products.
CommentDantec fire~safe VRS composite hose, provides maximum protection for your assets when transferring fuel & other hazardous liquids, vapour is released gradually to prevent sudden catastrophic failure.
A tough, high strength composite transfer hose.
Inner helixGalvanised Mild Steel
LiningPolypropylene
Fabric ReinforcementPolypropylene, Polyester
Sealing FilmPolypropylene, Polyester
CoverRed PVC coated Polyester fabric.
Outer helixGalvanised Mild Steel
StandardEN13765 Type 3
Max WP bar14 Bar (DN 250 = 10,5 Bar)
Safety factorStandard: 4:1
Heavy Duty: 5:1
Temperature min.-30 ° C
Temperature max.100 ° C
MarkingMarking on coupling ferrule: DD.MM.YY · Serial Number · xx MM / xx bar · BSEN13765
SizeDN 25 to DN 250
Size (ID)38 mm (1½")
Product Name38 mm (1½")
Part Number38
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Please Note:
For the correct choice of coupling and sealing materials please refer to our
chemical resistance chart or contact our sales team.
Last Update: 20.08.2021