Configurator Hose Assemblies

HomeBack to Start
Select:
1
Type: Danoil®
Product NameDanoil®
DescriptionA comprehensive range of both lightweight and heavyweight composite hoses designed for road tanker/ forecourt fuel delivery as well as heavier duty ship to shore and on board marine transfer.
2
Hose Type: Danoil 9SG Fire~Safe VRS - Polyamide lined fire~safe VRS composite hose with stainless steel inner wire and galvanised mild steel outer wire.
Product NameDanoil 9SG Fire~Safe VRS
Part NumberD9SGFIRE
Short DescriptionPolyamide lined fire~safe VRS composite hose with stainless steel inner wire and galvanised mild steel outer wire.
DescriptionMulti-layer thermoplastic hoses (composite hoses), for suction and pressure operation.
ApplicationRail car loading and unloading, road tanker bottom loading & in plant hose exchanges.
Application Heavy DutyShip to shore and on board marine transfer.
MediaBiodiesel, high aromatic solvents and MTBE.
CommentDantec fire~safe VRS composite hose, provides maximum protection for your assets when transferring fuel & other hazardous liquids, vapour is released gradually to prevent sudden catastrophic failure.
A tough, high strength composite transfer hose.
Inner helixStainless Steel AISI 316
LiningPolyamide
Fabric ReinforcementPolypropylene, Polyamide
Sealing FilmPolyamide, Polyester
CoverRed PVC coated Polyester fabric.
Outer helixGalvanised Mild Steel
StandardEN13765 Type 3
Max WP bar14 Bar (DN 250 = 10,5 Bar)
Safety factorStandard: 4:1
Heavy Duty: 5:1
Temperature min.-30 ° C
Temperature max.100 ° C
MarkingMarking on coupling ferrule: DD.MM.YY · Serial Number · xx MM / xx bar · BSEN13765
SizeDN 25 to DN 250
2
Size (ID): 250 mm (10") HD (Heavy Duty)
Product Name250 mm (10") HD (Heavy Duty)
Part NumberHD 250
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Type 1: Flanges
5
Coupling 1: Flange
5
Coupling Detail 1: BS 10 Table D SS swiveling flange - SS Stub - PCS ferrule
Product NameBS 10 Table D SS swiveling flange - SS Stub - PCS ferrule
5
Accessories 1
Without Accessories

Without Accessories

Insulating

Insulating

Additional Info
5Hose Coupling 2
6Part No.

Note: Illustration shows a DN 100 mm nominal bore hose. Picture may differ from original product.

Part Number

D9SGFIRE HD 250 L1=m BS 10 Table D SS swiveling flange - SS Stub - PCS ferrule

Hose TypeDanoil 9SG Fire~Safe VRS - Polyamide lined fire~safe VRS composite hose with stainless steel inner wire and galvanised mild steel outer wire.
Product NameDanoil 9SG Fire~Safe VRS
Part NumberD9SGFIRE
Short DescriptionPolyamide lined fire~safe VRS composite hose with stainless steel inner wire and galvanised mild steel outer wire.
DescriptionMulti-layer thermoplastic hoses (composite hoses), for suction and pressure operation.
ApplicationRail car loading and unloading, road tanker bottom loading & in plant hose exchanges.
Application Heavy DutyShip to shore and on board marine transfer.
MediaBiodiesel, high aromatic solvents and MTBE.
CommentDantec fire~safe VRS composite hose, provides maximum protection for your assets when transferring fuel & other hazardous liquids, vapour is released gradually to prevent sudden catastrophic failure.
A tough, high strength composite transfer hose.
Inner helixStainless Steel AISI 316
LiningPolyamide
Fabric ReinforcementPolypropylene, Polyamide
Sealing FilmPolyamide, Polyester
CoverRed PVC coated Polyester fabric.
Outer helixGalvanised Mild Steel
StandardEN13765 Type 3
Max WP bar14 Bar (DN 250 = 10,5 Bar)
Safety factorStandard: 4:1
Heavy Duty: 5:1
Temperature min.-30 ° C
Temperature max.100 ° C
MarkingMarking on coupling ferrule: DD.MM.YY · Serial Number · xx MM / xx bar · BSEN13765
SizeDN 25 to DN 250
Size (ID)250 mm (10") HD (Heavy Duty)
Product Name250 mm (10") HD (Heavy Duty)
Part NumberHD 250
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingFlange
Coupling DetailBS 10 Table D SS swiveling flange - SS Stub - PCS ferrule
Product NameBS 10 Table D SS swiveling flange - SS Stub - PCS ferrule
StandardBS 10 Table D
Product NameBS 10 Table D
DescriptionBS10 Table D 100PSI
Hose Tail MaterialStainless Steel (SS)
Product NameStainless Steel (SS)
Description316 stainless steel 1.4401 (other grades available on request)
Flange MaterialStainless Steel (SS)
FerrulesPlated Carbon Steel
Product NamePlated Carbon Steel
DescriptionPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
Click to Compare
Last Update: 03.06.2019